• tutorial series 1202 [infiniti replace window] • note: to get a closer view click the picture
• this was performed on an 02 infinite G20 by w from lowbad.com•

 this tutorial and all pictures are property of lowbad.com  | © copyright lowbad.com, all rights reserved.

someone decided it would be cool to break into my car one night by breaking my window and taking some stuff... i guess they had a G20 and needed to know how to replace a window
[its not that great of a tutorial but i documented it so i figured why not] - w

 pre install a: a broken window to replace
 this picture is before anything has started; my nice and broke window.

needed parts; the window, Phillips, flat, ratchet,and a vacuum if your window was broke like mine :(

~ here is the 3rd pic of the mess ~

 pre install b: parts needed
 and you guessed it! a new window!! who would have thought huh?

 01). start taking off the door panel...
a). pop off the screw cover

b). unscrew the center screw.

c). start to pop off the front hand rest cover.

easy enough for you so far :D hehe this one is going to be

 02). still.. taking off the door panel...
a). pop the front of the hand rest off and unscrew all the screws...

b). then start popping off the door panel.

03). still... taking off the damn door panel...
a). after popping off the door panel you will have to keep it 1/2 way like pictured because of the electric window wire clip.

b). electric window wire clip. unclip this and you are free to take the door panel off.

04). start of the actual work
a). after the door panel is off here is what you have... now to start removing everything that is blocking the plastic. or just lift the bottom up and go to step 5.

b). picture with removed plastic and misc pieces that are in the way...

 05). removing the old window tabs
a). reconnect the electric window switch so you can move the crank down to the bottom holes and for easy access to the window clip bolts (circled)

b). closer view of the window clip bolts to remove... now remove them.

07). removing the broken/old window clips
 a). here is a picture of the old window clips that you just removed.... yay

 08). putting the window in
throw that bitch in from the top, line it up, bolt it in and go backwards in steps from starting from 5 to 1.

 09). done... woohoo.. lol
finished product... hehe

i know its a lame tutorial but hell, i had to do it so i figured i would document it...